Tytan®SAT tracking devices are now equipped with antihijack function that allows a vehicle to be stopped. Tytan®SAT device receives ‘antihijack on’ command via SMS or GPRS, waits until the driver switches off the ignition and blocks the vehicle. To unblock the vehicle, ‘antihijack off’ command must be sent. The command restores normal engine work.
Operation of antihijack function can be signalled by a LED or a buzzer.
Change of antihijack function triggers transmission of data packet to the server, so the server receives information immediately when the vehicle stops.
Have no fear of sabotage to your tracker circuit. Internal LiPo battery allows Tytan®SAT device to operate in emergency conditions when vehicle battery is disconnected. The device still remains online and sends data to the server.
Thank you for visiting our booth at #CeBIT #TytanAlarms #Tytan #TytanGPS #TytanSAT
Now the preparations for CeBIT are in full swing!
Visit #DigitalSystems at #CeBIT2017 #CeBIT Hall 12, Booth A32 to see #TytanSAT #DS520 #DS540 #TrackingDevice and #TytanGPS #DS512 #VehicleSecurity.
We are pleased to inform that #TytanSAT #GPS #tracking_device #DS520 and #DS540 provide power saving modes. You decide which mode is enabled in your unit:
- NORMAL MODE – your unit operates actively all the time; power consumption: 36mA
- GPS SLEEP MODE – when the vehicle is parked your device disables GPS receiver; power consumption: 14mA
- DEEP SLEEP MODE – when you leave your car unused for a several days the device disables both GPS receiver and GSM modem and also makes processor asleep; power consumption: 1.2mA
More information in Tytan®SAT devices’ manuals.
